The circuit was designed to provide an alarm system against any form of burglary based on the operation of CMOS 4011 where a high output…
The handy project is built around a small Microchip 12F509 controller, an alarm, and a temperature sensor to remember the monitored…
The circuit was designed to illustrate the operation of an electronic keypad to be utilized in the burglar alarm system by having five…
The project has been renamed to Dynamically Programmable Alarm Clock (DPAC) which connects to Google Calendar through Wi-Fi and collects…
The circuit was designed to provide an alarm system that would transmit signals across the medium wave or the radio wave.
Medium Wave –…
The circuit employs the functions of reed switches to produce a gate alarm that is powered by a universal AC/DC power supply
The project aims to develop a GSM alarm unit that can be controlled by BasicX24 stamp module.
In the design, the BX24 board has been…
The circuit has been designed to provide an alarm system against any form of burglary wherein it can be expanded by adding modules and…
The circuit was constructed to be appropriate with small office or home environment which consists of seven-segment LED to display which…
Sometimes when you’re working too many hours at work it gets harder and harder for you to wake up in the morning. But it is possible for…
Ultrasonic Burglar Alarm: Transmitter and receiver parts of the circuit are connected each other by using a triple cable. System operates…
The circuit was constructed to provide an alarm circuit that is reliable, simple, small size, and low in power consumption.
The circuit has been designed to provide an alarm with the use of a buzzer when sensing high temperature by using a thermistor.
*…
The main purpose of this device is to operate as standalone or as a module for existing alarm sytem.
The design of the project is based on…
Parts List
The circuit will be useful as personal alarm and anti-snatching bag unit since the design is very small and portable, which can…
The circuit was designed sensitive enough to trigger and activate the alarm upon sensing wetness, moisture or dampness on its probes.
*…
The circuit will provide a…
The burglar alarm circuit design was based on the operation of CMOS 4001 where a high output would only result if both the inputs to the…
The circuit was intended for monitoring and measuring the fluid level or content in a storage tank or reservoir by providing visual display…
The circuit was designed to produce a circuit that will alarm a sleeping person to prevent snoring by using a vibrator instead of an audio…