The views, opinions, positions or strategies expressed by the author and those providing comments are theirs alone, and do not…
The project involves the addition of quality audio with the use of shield for Arduino which can play up to 22KHz of 12-bit uncompressed…
The project illustrates an old Arduino USB board being hacked by finding the right pins and stringing a capacitor between the serial…
The device includes the connection between an Arduino microcontroller and an optical mouse sensor to provide help in reading the movements…
The project utilizes an Arduino in a beer fridge controller in order to control a compressor, log the temperature, and monitor the…
The project aims to build an Arduino based talking and remote thermometer using a few cheap and obtainable components in order to function…
The project uses an Arduino to create a traffic light that is designed to be an ambient information device such as IM notification or…
One of the Minimalist Arduino kits along with some nixie tubes were us to create a nixie tube display which accepts serial inputs to set…
The project involves coding the Arduino while sequencing 8 tone slots and the frequency of each slot would be controlled by a frequency…
What is Halloween without that funny and scary stuff we buy at the market? Now, we can simply put things together to make your own.
With…
The Arduino based capacity tester of true battery power is capable of measuring almost any type of rechargeable or non-rechargeable…
With three analog panel meters, the project was able to display a time connected to the Internet.
The computing platform is provided by…
The S65-Shield is considered as a plug-in module that can be used as an efficient and low cost tool.
The device consists of micro SD…
This umbrella project intends to create an immersive, mobile, and highly personal multi-sensory environment by offering an entirely new…
The 3D controller project contains hand-position sensing system that can preserve some appearance of functionality.
In the design, some…
The project shows how to use an Arduino for temperature control of a beer keg built inside a refrigerator known as Kegerator.
The…
The magnet floating device operates using a small Hall Effect sensor where the field of the permanent magnet can be detected or be able to…
The interfacing between the Arduino with I2C is being explained in this project.
One good thing about using the readily available and…
The circuit was based on the use of Arduino AVR to build a high voltage programmer which can be used to fix pesky fuses.
There are cases…
The project is a way of building a cheaper Arduino-compatible board with very little extra time investment on each.
In collecting parts…