The project utilizes water pumps to create a spectrum analyzer that will be interfaced with real-time audio.
The project features…
The project involves the addition of quality audio with the use of shield for Arduino which can play up to 22KHz of 12-bit uncompressed…
The circuit has been designed for loudspeakers to provide a monitoring scheme of audio power being supplied which will determine that any…
The audio player was built using an SD memory card and the ATtinyX5 series 8-pin AVR microcontroller.
The SD audio player is able to…
The circuit is designed to detect audio signals on a remote area for security purposes.
Preamplifier (preamp) – a device normally used…
The project, known as Craft, was developed in order to generate sound and VGA video signal on a single AVR chip.
The Craft is considered…
This audio spectrum analyzer utilizes an ARM7 LPC2138 microcontroller to create an FFT algorithm while performing digital signal processing…
The circuit was designed to produce a preamplifier with symmetrical audio input while the output operates in Class A type.
*…
The primary concept of designing this line driver / preamplifier circuit is to be able to perceive music from a remote location by running…
The circuit was designed to create a method by which the common signal can be removed from a musical song.
*Common Signal – used to…The project is an improved design of the Pixie which originally consists of an LM386 audio amp and just two transistors.
The design of the…
The project utilizes a LPC1768 based microcontroller to produce an audio echo/delay effect pedal since the microcontroller has a great…
This real-time audio spectrogram utilizes a standard VGA monitor to compute and display the frequency spectrum of an audio signal.
An…
Any sound can be sent to any FM radio from any room by this simple 2-transistor audio transmitter.
During the usage, the radio and the…
The project illustrates the use of Arduino for generating audio VGA visuals which is related to the dual monitor VGA hacking project.
In…
The AVR project utilizes a small graphics LCD to display the monitored spectrum and waveform of audio signal.
The full graphics type LCD…
The circuit shows the peak level of the audio input using MOSFET Op-Amp.
Audio level meters are designed to allow the optimum setting of…
The tube audio amplififer was designed using SRPP 12SL7 tubes as the driver stage and SIPP KT88 tubes as the output stage to produce a…
Here is a multi channel audio mixer circuit based on 2N3819 n-channel JFET. It mixes as many as inputs into one channel. The design seen in…
The device was made in a one-sided PCB with the use of USB to create a high quality preamplifier with built-in DAC.
The USB connector was…