Check out the latest episode of “This Week in Engineering” as they describe how scientists at MIT have developed an alternative to the defunct…
The Arduino based capacity tester of true battery power is capable of measuring almost any type of rechargeable or non-rechargeable…
The project illustrates a constant current and automatic charge termination when the total voltage for all cells reach the setting voltage…
The circuit was designed to provide a variety of voltages to some electronic equipment with the use of a 12V battery as the power…
The project utilizes an MC34063 for the circuit to function as automatic controller as it creates an artificial plate battery which are…
The project allows a white LED or UV LED to be driven from one-cell or two-cell batteries without the use of inductors.
Four transistors…
The circuit was built around the LM317 along with one resistor and one trimmer to construct a LiPo calibrator for balancing the element in…
The circuit has been enhanced from another version of battery-powered amplifier where an input buffer feeding the inverting input and the…
The goal of the project is to create a smaller and portable Plasma Gun device that will be based on the larger battery powered Tesla…
The project makes the USB port a convenient source of power for devices such as battery charger for a pair of AA Nickel Metal Hydride…
The project is designed to power a device via USB cable using two standard AA and some electronics to form a battery box.
The use of this…
The device utilizes a large 50W resistor to be used for discharging NiCad battery pack.
The discharging of NiCad is being controlled from…
The project is intended for typical rechargeable batteries used by R/C devices, various consumer product batteries, and electronics…
The accugraph project aims to discharge NiCd/NiMh/LiPo rechargeable batteries and collects data in order to keep the rechargeable batteries…
The project illustrates how it managed to power AVR microcontroller from a single AA battery with simple circuitry which is also driven by…
The project utilizes an Atmel ATtiny13V in order to create the Batwatch that will be used to monitor a solar panel battery charger.
During…
The project uses a cheap and reliable discharger circuit with an easy visual indication of the battery’s state as it creates a precision…
The simple project is built around an ATmega8 that utilizes PWM and ADC to control the charging current of NiMH battery cells.
One very…
This week’s video covers topics ranging from the smallest microphone to the largest rechargeable battery. This video is produced by…
Laptop batteries can be one of the most frustrating parts of an older laptop. They differ from other types of batteries in that they…