Clock tree synthesis (CTS) has become more critical in ASIC design due to increasing clock speeds, higher numbers of logic gates, and…
The face of the desk clock utilizes RGB LEDs wherein a color is assigned to each hand and the colors are mixed as the hands overlap on the…
The project intends to create an open source portion on a dot matrix clock software.
The device provides a total of 1280 LEDs from a 40×16…
This single digit E1T clock was designed to be used for measurement equipment with high-speed counting.
A central position in the circuit…
The project has been renamed to Dynamically Programmable Alarm Clock (DPAC) which connects to Google Calendar through Wi-Fi and collects…
This clock is a truly amazing, it has many features not found in the typical Nixie clock that cannot be found in most clocks of any…
The project utilizes a PIC16F628 microcontroller in order to create radio controlled clock that originates from NIST Radio Station WWVB…
The project was designed around the ATmega8 microcontroller, to be made as a digital clock wherein 13mm high characters will be displayed…
The digital desk clock project was created for displaying the time and date on ten 7-segment displays.
The project was built based on some…
Based on an Atmel AVR microcontroller with 8kB flash, the LED clock uses a German time signal in the form of DCF77 Receiver as it was…
The small adjustable digital clock circuit is based on the PIC16F84A microchip.
One of the oldest human inventions is the clock which is…
The project utilizes a PIC chip to create a clock that will display the time in an old monitor and will behave like a USB device.
A…
This Arduino based snow clock has the feature of turning ON when the school is open and automatically turns off when the school is…
This clock project is based on an Intel 8008 first generation 8-bit microprocessor which is also a fully operational 8008 computer.
The…
This digital clock uses a standard time display format with a great feature of displaying seconds using an analog meter.
To make the…
The amazing icy blue color ice tube clock is a high-end digital clock which operates on a high voltage that ranges from 40V to 70V DC.
The…
This is a specially designed clock which can be programmed after the assembly and is intended to tbe used with a KS0108 monochrome LCD…
The project aims to build a digital clock by using an Arduino while lighting up a group of discrete LEDs wherein each segment is driven by…
The circuit demonstrates the interfacing of a Philips LPC2000-ARM7TDMI to produce a T-Clock where the name is derived from a flipped…
The project illustrates the use of X-Y oscilloscope in order to create a fully functional clock that runs on an AVR board.
The AVR board…