The project is a simple 12-bit, 8-channel analog to digital converter that can be connected via the serial RS232 interface to the PC.
The…
The project illustrates how the screen plots of GPIB instrument on the laptop can be obtained easily without complex software and low cost…
The project illustrates the construction of an electronic Trigger to MIDI Converter module based on PIC microcontroller in order to create…
The project is built around the MAX6675 chip which produces the result reading to the attached LCD screen by taking and amplifying the…
The purpose of the project is to convert a PS2 controller into a MIDI controller based on the functionality of a PIC microchip.
Any button…
Two easily formed R/C pulse signals are converted into a PWM signal suitable for driving small motors as it uses an AVR chip and…
The project aims to create a display in an oscilloscope by using composite video instead of VGA signals to build a simplified VGA-to-Scope…
An infrared transmit and receive interface has been converted to an RS232 serial interface on this project with the use of a microchip PIC…
The project illustrates the use of VGA to SCART interface for converting RGB which allows a VGA card to TV using a few common…
The project is designed to create a good AVR boost converter that can be used to step up voltage from a battery by simply switching the…
The project provides the conversion between an RS232 serial interface and an SPI interface which uses the SSP port on a 16F819 device.
It…
The circuit was designed to create a frequency convert with the use of a crystal oscillator for the conversion of 10 MHz to 1 MHz.
The circuit was constructed for the purpose of transforming a stereo power amplifier to mono where the two channels are bridged…
This small and simple circuit allows you to connect your VGA card to your TV via SCART with the great advantages of using RGB over…
This 555 timer based circuit is a kind of voltmeter, also an analog to digital converter, that converts the analog input voltage to digital…
The circuit is aimed to produce a 50W power converter that would supply different small appliances by converting 12 VDC to 220 VAC, and the…
Often, power design is the last consideration in a system. Then, most users want a box that just…