The VHF super regenerative receiver has been trimmed down to a single transistor without compromising its tremendous sensitivity and…
The wireless FM transmitter project enables a user to speak into the transmitter using a microphone where the voice can be heard on any FM…
The circuit was designed to operate a frequency modulation voice transmitter over the FM band 2 frequency range of VHF.
The project produces a sensitive FM transmitter that can transmit the signal up to 45 yards and can pick up the signal up to 100 yards from…
The circuit was designed to function on the middle of the FM band, 98 MHz, since the FM frequency ranges from 88 MHz to 108 MHz.
*…
This circuit is a VHF (Very High Frequency) preamplifier for the band two spectrum tuning approx. 88 – 108 MHz.
The 2N3819 FETs are…
This project contains a very unique one transistor FM receiver accompanied by homemade air-core coils and a homemade fixed capacitor.
The…
The wireless FM transmitter project enables a user to speak into the transmitter using a microphone where the voice can be heard on any FM…
This one is a high power FM wireless microphone that provides very good frequency stability in about 1km range and very good microphone…
The circuit was designed to produce a 500mW output power transmitter whose signal modulated by FM using four transistors.
The important part of the circuit is formed of the Colpitts type oscillator. C3,C4,C5,C6,CD1-CD2 and L1 determines the frequency….
The possibility of producing FM crystal radio is shown in this project which can produce a sound with high fidelity that is as good as or…
The circuit was constructed using a few components that is powered by a 9 V battery for sensing the presence of bugs transmitting within…