The projected is created to measure and count the frequencies and times as well as reckoning the events by using discrete high speed CMOS…
The project employs a sliding window for calculation of multiple frequency updates per second on this frequency counter and timer.
During…
The project is based on Lattice ispLSI2032 PLD and AT90S8515 microcontroller to create a universal frequency counter that has the ability…
The project was designed to build a frequency generator based on 555 timer that can be used as a body zapper.
During the assembly of the…
The project was developed for measuring frequencies from 5Hz to 500kHz as it was based on the AT89C52 microcontroller.
This 500kHz…
The circuit was designed using the Exar 2206 IC to create the Function Generator that will produce Sine, Triangle, and Square waves with…
The device is a simple, small, and cheap frequency meter with out any hard to find components to be able to measure frequencies up to 40…
The project is designed to measure frequencies ranging from 1Hz to over 2 MHz by using the 20-pin ATtiny2313 microcontroller.
A standard…
The project is a low cost frequency counter that utilizes widely available elements where the frequencies can be measured by the meter with…
Designing the circuit for this antenna to be telescopic makes it collapsible where it can be extended to its full length or retracted to a…
An Atmel AT90S2313 microcontroller is used to build this RS232 frequency meter which can communicate at 9600 baud through an RS232 terminal…
The frequency counter project operates with 40MHz while integrating an 8-digit LCD display.
The device can be an optional offsets for use…
The circuit was constructed to produce a frequency divider with the use of flip flops which are the basic building blocks of sequential…
The circuit was designed to function on the middle of the FM band, 98 MHz, since the FM frequency ranges from 88 MHz to 108 MHz.
*…
The project utilizes an AVR controller that can be used as a counter by being more involved with a PIC which has synchronous counter…
The frequency counter is built around a PIC16F84 microcontroller for the frequency range of 100Hz to 2.5GHz.
The device utilizes an LCD…
The project was created to turn a multimeter into a sensitive frequency counter with a wide counting range.
An old frequency counter can…
The circuit was designed to be able to amplify or attenuate some regions of the acoustic spectrum with the use of a graphic equalizer.
*…
The circuit was designed to create a frequency convert with the use of a crystal oscillator for the conversion of 10 MHz to 1 MHz.
This simple circuit has…