The project utilizes either serial or USB formats to allow the base/hub boards to be connected to a PC.
In using USB interface, the board…
The project employs Finite State Machine (FSM) to interface a typical HD44780 Text LCD to an FPGA using delay elements.
A microcontroller…
The goal of the project is to provide 8 digital I/O ports with the NXT by using a simple I2C chip with either binary input or output on…
The Easy Input project is a head-controlled keyboard and mouse input device that is designed for disabled users.
In the design,…
A complete fetch and decoding of AT keyboard scan patterns are being shown in this project along with the RS232 transmission of ASCII…
The CUI board was designed based on the PIC18F4550 microcontroller in order to function as a musical interface, a novel visual interface,…
The project illustrates the use of bit-banging on a 12F683 device by the PS/2 interface which can come from the mouse or keyboard with the…
The project utilizes a PIC chip to create a clock that will display the time in an old monitor and will behave like a USB device.
A…
The project illustrates a wearable keyboard that is ported to AT90USBKEY demo board which uses USB interface to connect to a PC.
During…
The project is presented to the operating system as USB joystick with 4 directional buttons and 8 general purpose buttons as the interface…
The circuit was designed to allow the control of a computer using a standard TV remote control that passes through an IR receiver.
The…
The objective of the project is to convert the accepted serial data from an Arduino board into IDI drum data in OSX as it creates a…
This project aims to build a dock to interface an iPod with other devices by taking advantage of its video, audio, Serial, USB and…
The project illustrates the construction of a USB keyboard in the form of an old C64 breadbox with minimal modifications such as altering…
The project was designed as USB interface with the use of a microcontroller known as Cypress CY7C68013 that is based on 8051…
The project uses a high speed A/D converter TLC5510 to directly drive the USB module while creating a simple oscilloscope probe.
The…
Controlling some devices through USB interface is being demonstrated on this project with Delphi 6 used to program the PC host…
The project illustrates how an Arduino board was interfaced with MQ-3 Alcohol Gas Sensor to create the Breathalyzer.
One ADC input of…
This RS232-to-USB conversion module is known as U232 which can be used for replacement of PCB mount DB-9 and DB-25 connectors.
An existing…
An LCD can be made to connect to a microcontroller using two wires with the aid of the I2C interface which includes pins for an SPI…