Two communication links consisting of IR and RF are being used by this remote control which is subdivided into three parts as separate…
The goal of the project is to show how an IR remote control extender/repeater was built in order for electronic appliances from a remote…
The IR signals from various TV, audio VCR remote controls can be captured by this universal remote control tester while the detector is…
The circuit allows the control of D70 remotely to release the shutter or do a bulb exposure while avoiding camera shake and could also be…
The project develops a USB powered IR sensor by using an ATtiny13A, an IR motion sensor, and a metal candy Mario Bros mushroom tin.
A USB…
The project was created with PIC16F84 processor to allow the decoders to see the codes that are being transmitted by the remote since every…
The circuit was constructed to produce a remote control by utilizing infrared technology and providing the output through the RS232…
The circuit is aimed to provide a method for receiving serial data on one pin and transmitting serial data on another with a modulation at…
The infrared signals used by remote controls are being captured by the IR Widget which operates in a way that makes it compatible with…
The project was designed for Arduino system with the integration of infrared remote control receiver.
The use of Arduino system proves to…
This low cost project can be used to reproduce an audio from TV without creating any disturbance from other people.
No wire will be used…
The project aims to build a very simple clock that does not contain any buttons, alarms, or settings besides time as it uses infrared to…
The device is made to adjust the lights in a house with the use of any type of remote controller with IR interface to improve the quality…
This is a 32 channel infrared remote controller circuit fundamentally includes key pad, decoder, transducer stage, an output and a battery….
The IR light dimmer project was built for use in connection to existing home wiring installation inside a junction box which is usually…
An ATmega8 was used to build this circuit which can be used to control the DC motor found on toy car wheels with gears through IR remote…