The project is a 12” digit height 7-segment display which was made from 15×4 LEDs wherein 4 LEDs are connected in series and fifteen…
The design illustrates the fading and brightening of the pulsating LED with the use LM1458 op-amp functionality.
The LEDs are made to fade…
The LED Micro-Readerboard utilizes a common-cathode alphanumeric LED display that spells out simple programmed messages and one letter at a…
Medical facilities are taking advantage of the inherent characteristics of high-performance LEDs, which provide superior lighting, longer…
The project was based on 3 LEDs to form the Red, Green, & Blue in place of a real RGD LED on a PCB that is connected to the controller…
The project is known as the Joule Thief which is an open PCB torch that takes either an AA or AAA battery in the holder and lights a white…
The project features 9 white LEDs placed on Menorah shaped PCB and is being powered by an AVR ATtiny13 microcontroller.
A Menorah refers…
The circuit uses a LED array to create a heart shape device that can be used as a gift during Valentine’s or any special occasion.
The…
Using an LM317T adjustable voltage regulator with a current programming resistor is the basic concept of this project in order to get a…
This project is a better version compared to other RGB LED controller since it is intelligent enough to understand different color palettes…
The project is an 8×16 pixel array built with ATtiny861 microcontroller which can show various images and be displayed in a window to…
The project explores how to interact with gravity using half a ping pong ball and some LEDs.
In the design, a red dot can be seen on the…
The circuit has been designed for loudspeakers to provide a monitoring scheme of audio power being supplied which will determine that any…
The circuit demonstrates a torch out of Light-Emitting Diode (LED).
LED’s are semiconductor diodes that are commonly electronic light…
The project illustrates high power LED being driven to create a cheap and simple blinking LED.
The idea behind the blinking effect is…
This LED PWM lamp controller illustrates how multiple lamps can be strung together in order to produce large sequence of light.
Before the…
The project illustrates the orientation independent 3D LED display which is actually a 5×5×5 cube display.
The 5×5×5 LED cube display…
This is a 1.2 – 12 V, max 1A power supply with a low voltage indicator LED. The indicator part includes three diodes and one LED. For…
The project is based on a PIC18F1320 microcontroller that creates a dry climate niche dweller like a cactus known as LEDactus which can…