A reversible DC motor can be controlled to spin clockwise and counterclockwise using this circuit which only has a single switch for single…
The device is designed to use parallel ports in order to connect a bipolar step motor to a personal computer.
The circuit is allowed to…
The project illustrates the use of a PIC microcontroller in creating the stepper motor controller by sequencing the steps, along the with…
The project has been developed to create a servo programmed by DSPIC microcontroller from driving small DC brushed motors that will be used…
The project utilizes scavenged stepper motors from disk drives or printers with some probing of an ohmmeter followed by some simple driver…
The circuit illustrates a construction of motors with the use of microcontrollers as the primary component.
One of the primary elements in…
The device is based on ATtiny13 microcontroller which has a mechanical pointer feature that can provide an indication of altitude for the…
This brushed motor ESC is designed to be used for aircraft as it uses a Microchip PIC12F675 and a small number of components.
A number of…
The project formulates a simple 5 motor racing lights having a start sequence with a random delay which can be used on real race track,…
My friend used to join drag racing before he had an accident, he drives small cars and trucks to race. But when he made one small mistake…
With these mods, this circuit will last quite a long time, especially if you make things easier for the relay by turning off power to the…
The project utilizes the tiny 8-pin PIC12C671 to build a simple serial servo controller chips.
Using a dedicated servo motor control IC…
The project creates a DC motor driver board that will control 2 small DC motors while the PSM driver board will control 3 channels of PWM…
The controller project utilizes oServo Object of OOPIC to control RC servos by focusing on 5 properties including the I/O line to use, the…
Featured in this project is the control of a stepper motor with its speed, direction, and step size by sending some signals through the…
This robot is capable of drawing power from the little solar panel on top as the clocks were modified to function as motors in order to run…
Simple hardware and software techniques are illustrated in this project wherein 3 common 4-coil stepper motors are driven and controlled…
An Arduino is used as an R/C interface that obtains commands from R/C receiver in order to control the wheel motors of a lawnmower through…
Many of us will consider this stuff basic; those who are trying to expand from building only things the arduino board can handle to bigger…
The project illustrates the control of two unipolar stepper motors using this circuit in full step mode through the RS232 serial port of…