The CompuLab company in Israel created the Fit PC device since they are a manufacturer of embedded, low power systems.
The construction of…
One good thing about this mod is the way the top panel reacts on the computer’s temperature change where it opens and closes compared to…
The PeanutBot robot comprises of three microphone circuits, three servo motors, an MCU, and a PC, which involves implementing a signal…
Here is a tiny DS1621 based PC thermometer using PC’s RS232 port for transferring data and getting the power. It displays the measured…
The project is a simple 12-bit, 8-channel analog to digital converter that can be connected via the serial RS232 interface to the PC.
The…
The Wireless Interactive Media Player (WIMP) is basically an MP3 stereo system with a wireless connection to a PC.
The design of the PCB…
Adding modern connectivity to the GBA system is illustrated in this project by creating an interface between a PC and a Nintendo GameBoy…
The project is known as Jumbotron DS where it uses 2 Tablet PC screens and an FPGA in between for the translation process where the pen…
The goal is to base this project on a conventional, state-of-the-art desktop PC intended for everyday use which is driven by solar power to…
The project was designed to create a servo tester that can be used to control two servos independently.
The quality of the servo signal…
The purpose of the project is to create a thermometer that can be plugged on any free serial port without using any programmable components…
The project illustrates how a PC and microcontroller were interfaced in order to control a servo and sense the value of a potentiometer or…
The project shows how special palm keyboards are used to communicate with Palm PDA via RS232 connector.
For the PIC based “Morse…
The project is focused on providing data to a scrolling LED display coming form a PC via a RF link.
The arrangement of lights is in a grid…
The oscilloscope utilizes the SPP or EPP parallel port LPT1 for reading the data from ADC0820 (TLC0820).
The program will automatically…
The circuit of power supply for PC works with a mains voltage of 230VAC to produce an output of 13.8V at 5A due to rectification.
This…
The circuit is aimed to build a computer sound card with input line in order to use a two mono stereo microphone.
TLC272 – a…The project illustrates the control of a PC fan speed and using an Arduino microcontroller to read a LM35 temperature sensor.
The use of…
The project illustrates the control of two unipolar stepper motors using this circuit in full step mode through the RS232 serial port of…