The IR signals from various TV, audio VCR remote controls can be captured by this universal remote control tester while the detector is…
The Arduino based capacity tester of true battery power is capable of measuring almost any type of rechargeable or non-rechargeable…
An AVR project that tests the DiSEqC swtiches which use 1.0 or 1.1 protocols. Additionally the tester supports 22 kHz tone mode.
The…
The circuit has been constructed to test and measure the voltage rating of zener diodes.
This R/C servo tester features digital accuracy and is easy to build and use since its signal emulator makes it a breeze to test and setup…
The Tiny monitor tester utilizes ATtiny2313 AVR MCU that runs at 20MHz speed and will be used for repairing broken PC monitors while…
An Atmel AT90S2343 8-pin MCU is used as the basis of building this servo tester that will be used to test servos modified for continuous…
The use of current regulator in a LED tester is shown in this project which will allow determining the exact voltage and current to supply…
The objective of the project is to create a device that is capable of outputting VGA signals to a CRT monitor in order to display figures,…
Wire Continuity Tester : While detecting discontinuities on a circuit board, it is probable to include resistors, semiconductors or other…
The circuit was…
The purpose of the project is to simply identify and test the condition of digital IC if it is good or defective.
An IC tester can be…
The circuit was developed to produce a continuity tester with a low resistance mainly for checking the connections between soldered…
While testing the power supplies or discovering their potential problems, you must apply dynamic and static tests. This circuit, namely…
Battery level indicators generally detect the voltage levels of the batteries to give a result. So, tester circuits must not be a heavy…
The circuit was designed to provide a means for measuring the operating voltage of zener diodes before applying on a circuit.