Circuit's Blog :
Return to BlogTDA2030 8 Watt Audio Amplifier
Posted Jan 14, 2012 at 10:59 am
Figure 1
Here is a TDA2030 based high quality amplifier circuit which delivers 8 watts of audio power. Although the TDA2030 IC can give up to 20W, to drive 10W 8Ω speakers, the output power is reduced to 8W which is more adequate for a small room.
Input sensitivity of the amplifier is 200mV and higher levels consequently will give greater output without distortion. The 47kΩ potentiometer is used for adjusting the gain of the amplifier.
TDA2030 is a very good amplifier IC for low to medium audio systems. On the other hand, speaker efficiency is another main important parameter that determines how loud the sound is. The speaker efficiency or sound pressure level (SPL – in dB/meter) will say you how loud the speaker will sound.
You should build two of them to use in stereo mode.
Read More:www.zen22142.zen.co.uk/Circuits/Audio/tda8.htm
Comments on this post:
Featured Products
Sullins Connectors
Wire-to-board interconnection options from Sullins feature a wide range of sizes and applications
MCC Voltage Suppressors
MCC’s TVS series high-power suppressors protect sensitive components from voltage spikes and transients
Bourns RS-485 Eval Boards
Evaluation boards that streamline evaluating circuit protection on RS-485 serial device ports
3 years ago: think youuuuu
3 years ago: plese send me audio circuit verey esey
.(JavaScript must be enabled to view this email address)
2 years ago: I am trying to build 4 of this circuit, will it cause some disadvantages? If anyone have tried, please let me know...thanks
2 years ago: I have tested this and it works best especially in headphones :)