Processing...

Electronics and Electrical Engineering Design Forum

 

Power

perkins 2300 series

hello buddies,
I have a Perkins Generator series 2300,but now when it runs at no-load condition it doesn’t work at 1500 rpm and has a fluctuation between 1400 rpm to 1450 rpm, please help me to make generator speed constant at 1500 rpm. also, the oil pressure is raised from 4.5 bar to 7 bar. it seems that it is not normal. please help me to adjust it.

Thanks.

ahwazspec@gmail.com
Asked By:
Amin Aeen
2 years ago
 
 
{username}
Score: 0

Dear friend. You can find more details in this http://www.google.lk/#hl=en&gs_nf=1&pq=perkins 2300 series generator&cp=19&gs_id=7h&xhr=t&q=perkins+2300+series&pf=p&sclient=psy-ab&oq=perkins+2300+series&gs;_l=&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.,cf.osb&fp=5995fa7a3168b483&biw=1280&bih=960

Check the governor controller unit and magnetic pickups conditions. Check and make correct gap for magnetic pickup. Check the link condition for governor actuator. Check the fuel oil filters condition. Check according to manufacture fuel oil pressure.have a nice day for you.

kuruppu.

» Reply
 
{username}
Score: 0

That sounds as that your oil filter is blocked and bypass is not working.
Replace filter and engine oil, if there is not enough oil it distoys your engine.

» Reply
 
{username}
Score: 0

yes, and you mean that it can cause the fluctuation and variation in speed?

» Reply
 
{username}
Score: 0

dirty filters (oil,fuel or air) are a big problem for generators it makes the swing more.
And if you have electronic control it looks out the power.
Check if your electronic controller (not the governor) that controlls the start stop and alarm conditions. In my case i changed to min. 46 Hz & Max. 52 Hz.
Also use the best type of engine oil and big size filters.
But in your case it also looks that your bypass that controlles the oil pressure is defect.

» Reply
Login or Register to discuss this topic.
x
Like free stuff? Enter Here!
EEWeb Weekly Giveaway Sponsored by Mouser This Week:ARM BeagleBone Open Source Dev Board
Enter Here
Login and enter if you're already a member.
Click Here