PCI Express(r) 3.0 Flying Lead Probe

PCI Express(r) 3.0 Flying Lead Probe

Agilent Technologies Inc. announced a new flying lead solder-down probe for PCI Express 3.0 protocol analysis. The new U4324A probe, for use with Agilent’s U4301A protocol analyzer module, is the industry’s most cost-effective solder-down probing solution.

“The PCI Express flying lead probe is designed for simplicity, flexibility and low cost,” said Rob Vezina, a PCI Express product marketing engineer at Agilent. “It cleanly captures 8.0 GT/s traces from the device under test while it eliminates the need to buy more expensive solder-down probes that contain wires that are unused for the testing application.”

Other probes on the market come equipped with 16, unmappable leads, resulting in unused leads that increase the price of the probe, even though they are not useful for today’s most common channel tests. Agilent’s U4324A flying lead probe can be used for bidirectional lane widths as narrow as x2, making it the most cost-effective solution for capturing 8 GT/s traces in the industry. It was designed with the needs of silicon, system and embedded PC connector testing in mind.

Agilent’s U4301A PCI Express 3.0 protocol analyzer can accept up to four flying lead probes, offering support for up to 16 channels. The module’s software enables users to remap any available wire on the probe. It also supports bidirectional capability, upstream or downstream, for every channel. What’s more, it can map any unused cable to replace a lead that is damaged or broken. Finally, the probe provides an additional line for connection to an external reference clock, and it supports 2.5-GT/s, 5-GT/s and 8-GT/s PCI Express IO speeds.

The most delicate part of any solder-down probe is the tip. To further reduce the cost of testing, Agilent’s U4324A PCI Express 3.0 flying lead probe works with Agilent’s low-cost, replaceable N5426A ZIF (zero insertion force) tip kit. Each of the four probe leads can then plug into the expendable ZIF tip, which is then soldered to the channel on the device under test. The kit allows users to easily replace tips as necessary, ensuring the long life of the Agilent U4324 flying lead solder-down probe.

Additional information is available at http://www.agilent.com/find/U4324A. A high-resolution screen image of Agilent’s U4324A flying lead probe is available at http://www.agilent.com/find/U4324A_images.

U.S. Pricing and Availability

The U4324A PCI Express 3.0 flying lead solder-down probe and ZIF tip kit are available now. The U4324A starts at approximately $7,000.

Article Sources: Agilent Press Release
Tags: ,
Advertisement

Comments on this Article:

Login or Register to post comments.
x
Like free stuff?
EEWeb Weekly Giveaway Sponsored by Mouser This Week: TI Low Profile NEXFet power supply dev kit!
Enter Here
Login and enter if you're already a member.
Click Here