Projects by EEWeb Members

  • Figure:1 sensor-up

    Line Following Sensor

    Posted May 23, 2012 By Nikhil Dhandare
    In robotics when we make line follower either black line follower or White line follower we need line follower sensor. Easy method to make…
    Comments(0)
  • Figure:2 microcontroller-schematic

    Line Following Robot

    Posted May 21, 2012 By Rinkesh Kurkure
    The motors I used for this robot are 2 servomotors modified for speed. You can also use other motors if it’s good enough. I didn’t have any so I…
    Comments(0)
  • Figure:3 Independent Design Houses in China Study

    Independent Design Houses in China

    Posted May 05, 2012 By Embedded Developer
    In August and September 2011, Embedded Developer LLC, in cooperation with 21IC, China’s leading site for engineers, and 21IDH, the leading site for…
    Comments(0)
  • Figure:4 car-alarm-system

    Car Alarm System

    Posted May 04, 2012 By Abba Ba
    The project is almost acceptable of a car alarm system, which could be completed with a transmitter and receiver.
    Comments(0)
  • Figure:5 3d view

    Digital Clock using AT89C4051

    Posted May 04, 2012 By Nikhil Dhandare
    This is the simple clock which we use in our life regularly. It has three push buttons which use to set the time, date. one is for mode selection and…
    Comments(0)
  • Figure:6 water alarm circuit

    Water Alarm Circuit

    Posted May 04, 2012 By ER.vindhya vasini Manath Mahajan
    this circuits remember us that our tank is near about to get full so that we turn off our motor switch but for this circuit you need a function…
    Comments(3)
  • electronics work bench

    Posted May 02, 2012 By LAKSHMI NARAYANA
    including all apparatus instruments in one bok.
    Comments(0)
  • Figure:8

    Android Bluetooth Oscilloscope

    Posted Apr 22, 2012 By Sopheak Chea
    Please share me the ideas of making this project.
    Comments(0)
  • ac to dc power supply

    Posted Apr 08, 2012 By Hasham Jamil
    The small project simply explain us how can we make an adjustable power supply by our self. This DC power supply gives us 0 to 12v adjustable voltage that can be easily adjust through variable…
    Comments(0)
  • power generation floor boards

    Posted Mar 31, 2012 By Ashesh Sharma
    currently doing a thesis on this topic if anyone can guide me a bit i will be so honored
    Comments(2)
  • automatic irrigation system using soil moisture sensor

    Posted Mar 31, 2012 By Ashesh Sharma
    Comments(0)
  • temperature sensor using lm 35 transducer

    Posted Mar 31, 2012 By Ashesh Sharma
    Comments(0)
  • The Naming System

    Posted Mar 22, 2012 By Precious O'Brien
    This chart is a cheat sheet that will help you better understand our product numbers and their meaning
    Comments(0)
  • Benefits of VLCD over VFD Modules

    Posted Mar 22, 2012 By Precious O'Brien
    This White paper will outline the vivid benefits of liquid crystal display (VLCD), in comparison to the vacuum fluorescent displays (VFD). Differences in the technical specifications that highlight…
    Comments(0)
  • Smart dual polarity power supply

    Posted Mar 17, 2012 By Nismin Pako
    I will please need your help for the circuit characteristic of a dual polarity power supply using a central tip transformer,fuse, LED, voltage regulators, with 5V-15V output voltage.
    Comments(0)
  • Figure:16 Image1

    Part 2 of the USB to RS232 Serial Converter

    Posted Mar 10, 2012 By Mark Harrington
    Over the last two weeks I published an article reference the USB to serial converter see Project Usb to serial converter…
    Comments(0)
  • Figure:17 parallel port relay board

    Relay Work with Parallel Port

    Posted Mar 09, 2012 By Prayag Hirpara
    Do you have an old PC lying around the house which absolutely no one wants?
    Comments(0)
  • Figure:18 Populated PCB

    Low Cost Solar Lantern II

    Posted Mar 08, 2012 By Joshua Bishop
    Progress on my solar lantern.
    Comments(3)
  • Figure:19 Structure of the Kidogo system

    Kidogo : 8 channel USB Digital Signal Injector

    Posted Feb 27, 2012 By Dilshan Jayakody
    Kidogo is 8 channel USB self powered digital signal injector. Kidogo system consists with Signal Editor and USB interface module. Kidogo Player is…
    Comments(0)
  • Figure:20 PCB Image

    USB to RS232 convertor Part 1

    Posted Feb 24, 2012 By Mark Harrington
    If you are stuck for a USB to serial conversion this is the answer to a complete solution using the FTDI Chip available from FTDI.com and provides…
    Comments(0)
 
Click Here