# RF Unit Converter

Make conversions between common RF units

## Rf Unit Converter

### Power

#### RF Unit Converter Introduction

This tool is a unit converter for voltage and power. There is an input for impedance that allows the relationship between power and voltage.

#### Ohm

The unit for resistance or impedance. Resistance can define the relationship between voltage and current and voltage and power. Based upon ohms law the voltage and current relatinship is:

r = \frac{v}{i}

and power is

power = \frac{v^{2}}{r}

#### Vpeak – Peak Voltage

Peak voltage of an AC signal is the peak amplitude.

#### Vrms – RMS Voltage

The Root Mean Square Voltage or Vrms is:

V_{rms}=\frac{V_{peak}}{\sqrt{2}}

#### uV – Microvolt (RMS)

This value is the RMS voltage in microvolts.

\mu V=\frac{V_{peak}}{\sqrt{2}}\cdot 10^{-6}

#### uV EMF

This value is microvolt with no termination or load.

\mu V_{emf}=\frac{2\cdot V_{peak}}{\sqrt{2}}\cdot 10^{-6}

#### uV PD

This value is microvolt with with a load. When a signal has a matched load then half of the voltage is droped across the load. This value is the same value as uV, The unit is just explicitly defined as having the load.

\mu V_{pd}=\frac{V_{peak}}{\sqrt{2}}\cdot 10^{-6}

#### dBuV – dB Microvolts RMS

This unit is the decibel of RMS microvolt.

dB\mu V=20\log \left ( \mu V \right )

#### dBuV EMF – dB Microvolts EMF

This unit is the decibel of EMF microvolt.

dB\mu V_{emf}=20\log \left ( \mu V_{emf} \right )

#### dBuV PD – dB Microvolts PD

This unit is the decibel of EMF microvolt.

dB\mu V_{pd}=20\log \left ( \mu V_{pd} \right )

#### W – Watts

Watts is a unit of power.

W=\frac{V_{rms}^{2}}{Z_{o}}

#### mW – Miliwatts

One thousandth of a watt.

mW=\frac{W}{10^{3}}

#### uW – Microwatts

One millionth of a watt.

\mu W=\frac{W}{10^{6}}

#### dBm

dBm is a power measurement and is the decibel of the power in mW.

dBm=10\log \left ( mW \right )

#### dBuW

dBuW is a power measurement and is the decibel of the power in uW.

dBm=10\log \left ( \mu W \right )

#### dBuW EMF

dBuW EMF is a power measurement and is the decibel of the power in uW. In a system with no termination or load.

dBm=10\log \left ( 2\cdot \mu W \right )

#### dBuW PD

dBuW PD is a power measurement and is the decibel of the power in uW. In a system with a matched load.

dBm=10\log \left (\mu W \right )

#### dBpW

dBpW is a power measurement and is the decibel of the power in pW.

dBm=10\log \left ( \mu W\cdot 1e6 \right )

#### dBpW EMF

dBpW EMF is a power measurement and is the decibel of the power in pW. In a system with no termination or load.

dBm=10\log \left ( 2\cdot \mu W\cdot 1e6 \right )

#### dBpW PD

dBpW PD is a power measurement and is the decibel of the power in pW. In a system with a matched load.

dBm=10\log \left (\mu W\cdot 1e6 \right )

x
Like free stuff? Enter Here!
EEWeb Weekly Giveaway Sponsored by Mouser This Week: Intel® Galileo Gen 2 Development Board
Enter Here