Advertisement

Electronics and Electrical Engineering Application Notes

Read the latest electronics engineering product design Application Notes.

​PCI Express DMA Reference Design Using External Memory

The PCI Express DMA reference design using external memory highlights the performance of the Intel Arria V, Arria 10, Cyclone V and Stratix V Hard IP for PCI Express using...

MultiBoot and Fallback Using ICAP in UltraScale+ FPGAs

This application note describes a key feature of UltraScale+™ FPGAs—MultiBoot. The MultiBoot feature in UltraScale+ FPGAs allows the FPGA application to load two or more FPGA bitstreams under the control...

PS and PL-Based Ethernet Performance with LightWeight IP Stack

This application note provides designs for implementing the PS Ethernet through the EMIO/MIO and Ethernet 1G in the PL to support multiple Ethernet links. Lightweight IP (lwIP) is an open...

Interference Hunting

In this application note, we’ll provide an overview of interference finding techniques and offer examples to help your next interference hunting efforts to be more successful. We’ll also look at...

Linduino for Power System Management

Most Power System Management designs follow a set and forget model. Setup and debug of Power System Management (PSM) devices is simple with LTpowerPlay® and when combined with a bulk...

Power Conversion Efficiency Measurement Methods

Efficiency is an assessment of how well time and effort are used to accomplish a specific task. If that task is the conversion of one form of power to another...

Temperature Logger with ATtiny817 and SD Card

This application note describes the implementation of a temperature logger, demonstrating use of several peripherals of the ATtiny817 AVR device. The TWI peripheral is used to communicate with an Atmel...

Zero Cross Detector

This application note shows the user how to implement a zero cross detector with a minimum of external components. It should be noted that this solution will not give...

Spartan-7 FPGA Configuration with SPI Flash and Bank 14 at 1.35V

  • General
  • Posted Wednesday, November 15, 2017
This application note describes a method for configuring a Spartan®-7 FPGA from a 1.8V serial peripheral interface (SPI) NOR flash memory connected to the FPGA dedicated I/O bank 0 at...

How to Install MAX44211 Output Protection

Unwanted transients emanating from the power line back to the line-driver's output and back-EMF generated by the coupling circuit when the load is disconnected and connected, and vice versa, create...