Advertisement

Electronics and Electrical Engineering Application Notes

Read the latest electronics engineering product design Application Notes.

TAGS: Digital

All Application Notes

Pulse Oximeter Design Using Microchip’s Analog Devices and dsPIC Digital Signal Controllers (DSCs)

Pulse oximeter is a non-invasive medical device that monitors the oxygen saturation of a patient’s blood and heart rate. This application note demonstrates the implementation of a high-accuracy pulse oximeter...

Digital Inrush Controller

This application note describes a Digital Inrush Controller that combines IXYS digital power control technology and Zilog’s 8-bit Z8F3281 MCU capabilities to illustrate a unique approach to control inrush current...

Octal High-Speed, High-Side Switch/Push-Pull Driver

The MAX14912/MAX14913 have eight 640mA smart high-side switches that can also be configured as push-pull drivers for high-speed switching. The propagation delay from input to switching of the high-side/low-side drivers...

Digital Diagnostic Monitoring Interface for XFP Optical Transceivers

This Application Note defines Finisar implementation of the XFP 2-wire serial interface, 3 which is used for serial ID, digital diagnostics, and certain control functions. The diagram above is the...

Designing An Isolated I2C Bus® Interface By Using Digital Isolators

The continuing changes in legislation concerning both the design and use of machinery and equipment require the isolation of almost any type of industrial system or interface. The inter-integrated circuit...

Pushing The Envelope With High-Performance, Digital-isolation Technology

  Isolation is a means of preventing DC and uncontrolled AC currents between two parts of a system, while allowing signal and power transfer between those two parts. Electronic devices...

ASIC Fixes for Noisy Analog “Oops”

Good application-specific integrated circuits (ASICs) enjoy > 90% first silicon success. You might wonder why we want to talk about ways to “fix” this? After all, the ASIC almost works...

Application of Serializers with Camera Chips

  Maxim serializers can connect and control camera ICs. Such devices include the MAX9257, with a half-duplex UART/I²C control channel, and the MAX9259 and MAX9263, both with a full-duplex simultaneous...

Fixed DC/DC Regulator Output Margining Using Digitally Controlled Potentiometer

Many applications using a DC/DC regulator are implemented with a resistor divider in the feedback path to set up Vout. However, for some high end applications, the voltage needs to...

TI DLP® Pico™ Technology for Aftermarket Head-up Displays

A head-up display (HUD) is a transparent display that superimposes rich, configurable, real-time data in a driver's normal line of sight. The HUD concept first appeared in military aircraft, where...