Advertisement

Electronics and Electrical Engineering Application Notes

Read the latest electronics engineering product design Application Notes.

TAGS: Ethernet

All Application Notes

1G/2.5G Ethernet Design Examples

  • General
  • Posted Wednesday, December 27, 2017
This document describes two design examples that demonstrate the 1G/2.5G Ethernet operations, one of which includes the IEEE 1588v2 feature. Features Dual-speed Ethernet operations—1G and 2.5G.Support for two channels.Option to...

1G to 10G Ethernet Dynamic Switching Using High-Speed Serial I/O Solution in the UltraScale Architecture

This application note targets the Ethernet designs that require dynamic switching between 1Gb/s to 10Gb/s using high-speed serial I/O links. The design uses the Xilinx Ethernet Solution Suite along with...

PS and PL-Based Ethernet Performance with LightWeight IP Stack

This application note provides designs for implementing the PS Ethernet through the EMIO/MIO and Ethernet 1G in the PL to support multiple Ethernet links. Lightweight IP (lwIP) is an open...

Parallel Redundancy Protocol Requires Fewer Units and Delivers Zero Fail Time

To meet the needs of one of the world’s largest petrochemical companies, Dexter Solution Systems and Belden were asked to provide a redundant industrial Ethernet and WLAN network according to...

Stratix 10 LL 10GbE MAC and Stratix 10 1G/2.5G/5G/10G Multi-Rate Ethernet PHY IP Cores

  Stratix® 10 1G/2.5G/5G/10G Multi-Rate Ethernet PHY IP core provides GMII and XGMII to the LL 10GbE MAC IP core. The Stratix® 10 1G/2.5G/5G/10G Multi-Rate Ethernet PHY IP core implements a single channel 1G/2.5G/5G/10Gbps serial...

How to Configure DP838xx for Ethernet Compliance Testing

This application report covers how to setup and configure the DP838xx PHY (using the customer EVM) for Ethernet Physical Layer Compliance (IEEE 802.3) testing as the device under test (DUT)...

Magnum Edge Switch Networks LAPD Cruisers

The Los Angeles Police Department (LAPD) is the third largest police department in the United States with over 10,000 officers responsible for a 500 mile, four million person area. With...

UART to Ethernet Gateway with SAM4S

This application note aims at describing the LwIP stack and how to use it to design a UART to Ethernet Gateway. This application note will elaborate the software architecture, internal...

40W Single Port MAX5971A Current Sensing

Many Power-over-Ethernet (PoE) power sourcing equipment (PSE) single port applications require real-time knowledge of the powered device (PD) current used after startup. The MAX5971A PSE controller with an Integrated MOSFET is capable...

Interfacing Intel® 8255x Fast Ethernet Controllers Without Magnetics

This document, and its associated circuitry, was conceived and developed in response to many requests by our OEM customers involved in embedded designs to reduce component expense and “real estate”...