Advertisement

Electronics and Electrical Engineering Application Notes

Read the latest electronics engineering product design Application Notes.

Single-Channel Power Supply Monitor with Remote Temperature Sense

Many applications with a single power regulator can benefit from the monitoring and control features of a power supply manager, but most power supply manager ICs have more than...

Linduino for Power System Management

Most Power System Management designs follow a set and forget model. Setup and debug of Power System Management (PSM) devices is simple with LTpowerPlay® and when combined with a bulk...

Power Conversion Efficiency Measurement Methods

Efficiency is an assessment of how well time and effort are used to accomplish a specific task. If that task is the conversion of one form of power to another...

A Step-by-Step Guide to Sequencing and Supervision

The LTC®2937 is a power supply sequencer and supervisor with features that make it ideal for power supply management. It has features that enable seamless cooperation between any number of...

PMBus SmartVID Controller Reference Designs

The PMBus® SmartVID Controller reference designs show you how to interface the SmartVID Controller IP core with the Power Management Bus or PMBus control system. The reference designs demonstrate the...

Power and Energy Monitoring with Digital Current Sensors

As the demand for power efficient systems continues to grow, accurately monitoring system power and energy consumption is increasingly important and is a problem more engineers must solve. One solution...

LED Blink Using Power Sequencing in Altera MAX Series

  • General
  • Posted Thursday, September 14, 2017
Powering components off and on—with minimal system intervention, also known as blink—is a valuable power savings technique. The supported Altera devices are well suited for this due to their simple...

Optimizing USB Audio for Stereo Output, Battery Powered Devices

  This application note characterizes the expected power usage of the XMOS USB Audio reference design running on the XS1-U6 device, configured for stereo out applications. The USB Audio reference design...

AN-1188 Power Line Communication to Send Digital Data using GreenPAK

  In this application note, eight appliances are controlled using one SLG46620V and their power status (whether the appliance is ON or OFF) is sent back using another SLG46620V. The...

Pushing The Envelope With High-Performance, Digital-isolation Technology

  Isolation is a means of preventing DC and uncontrolled AC currents between two parts of a system, while allowing signal and power transfer between those two parts. Electronic devices...