Advertisement

Electronics and Electrical Engineering Application Notes

Read the latest electronics engineering product design Application Notes.

TAGS: Resistor

All Application Notes

MIPI D-PHY Solution with Passive Resistor Networks in Intel Low-Cost FPGAs

The Mobile Industry Processor Interface (MIPI) is an industry consortium specifying high-speed serial interface solutions to interconnect between components inside a mobile device. The group specifies both protocols and physical...

Flexible Range ADC with I2C Interface

  The ADC is essentially comprised of an analog comparator and a Digital-to-Analog Converter (DAC). The comparator senses the input voltage vs. the DAC output voltage, and subsequently controls whether...

Thermal Management in Surface-Mounted Resistor Applications

Thermal management is becoming more important as the density of electronic components in modern printed circuit boards (PCBs), as well as the applied power, continues to increase. Both factors lead...

MIC2039 Single Input, Stack Configuration for High Current Applications

Because processors are required to work faster with each successive generation and the consumer electronics market expanding, the demand for compact power control circuits with high current capability is ever...

High Frequency MELF Resistors in Microwave Applications

Due to the rapidly increasing number of high frequency applications the resources below 1 GHz are becoming scarce. For this reason the frequency range up to and above 40 GHz...

Chip Resistors, Chip Diodes, & Power Chokes For Power Supplies & DC-DC Converter

Designers of electronic systems are challenged to provide circuits with improved efficiency and the ability to handle greater currents and higher voltages while reducing current leakage and decreasing the board...

Integrated-FET Power Switches with Automatic Current-Limit Adjustment

Placing a switch and a fuse between a power supply and its load allows for control and protection of power. An improvement on a simple switch and fuse is an...

Using Differential I/O Standards in MAX V Devices

This application note describes using differential I/O standards in MAX V devices. High-speed differential I/O standards have become popular in high-speed interfaces because of their significant advantages over the single-ended...

Understanding Digital Potentiometers Resistor Variations

All semiconductor devices have variations over process. In the case of digital potentiometer devices, this process variation affects the device resistive elements (RAB -> RS and RW). These resistive elements...

ADC with a Microcontroller, an Op Amp, and Resistors

Analog-to-digital converters (ADCs) are used in a wide range of electronic devices. However, most of the low-cost microcontrollers do not include an ADC peripheral. This design idea provides a way...