Advertisement

Electronics and Electrical Engineering Application Notes

Read the latest electronics engineering product design Application Notes.

TAGS: Sensor

All Application Notes

Core Independent Nightlight Using Configurable Custom Logic

This application note describes the use of Core Independent Peripherals (CIP), how to use the Configurable Custom Logic (CCL) to filter inputs from different sensors, and how to create specific...

Temperature Logger with ATtiny817 and SD Card

This application note describes the implementation of a temperature logger, demonstrating use of several peripherals of the ATtiny817 AVR device. The TWI peripheral is used to communicate with an Atmel...

Power and Energy Monitoring with Digital Current Sensors

As the demand for power efficient systems continues to grow, accurately monitoring system power and energy consumption is increasingly important and is a problem more engineers must solve. One solution...

Bourns® Linear Motion Potentiometers

Bourns® Linear Motion Potentiometers (LMPs) are an economical and reliable means of converting a mechanical displacement into an electrical signal that is proportional to that displacement. Bourns® LMP products are...

Vehicle Safety Systems

Occupant safety is one of the most critical elements of the automobile design. As a result, safety systems continue to become more sophisticated in order to limit, and ultimately prevent...

Using Rotary Position Sensors for Accurate, Long-Term Measurement in Electronic Linear Actuators

This paper will discuss a variety of rotary position feedback sensors including digital, contacting analog, and non-contacting analog, and may act as a high- level guide to selecting the right...

Connecting and Using Infrared Optoelectronics

This application note is intended to assist someone with little or no experience in connecting basic optoelectronic assemblies. A basic optoelectronic sensor assembly consists of two separate components. The first...

Freescale FRDM-K64F: Using MDK Middleware

This tutorial runs you through the development of a middleware application on the FRDM-K64F development board. The application reads data from a MEMS sensor (accelerometer and magnetometer) and displays it...

Reflective Optical Sensor SFH 7740

The SFH 7740 is a very small reflective optical sensor for short distances with digital output. With dimensions of only 3.7 x 3.7 x 1 mm, and surface-mount solder contacts...

AH180 MicroPower Omnipolar Hall-Effect Sensor Switch

AH180 is a low-power Omnipolar Hall-Effect Sensor Switch fabricated using an advanced CMOS process. The term “micropower” accurately describes the low-power capability of AH180 in both full operating and idle...