Advertisement

Electronics and Electrical Engineering Application Notes

Read the latest electronics engineering product design Application Notes.

TAGS: Temperature Sensing

All Application Notes

Single-Channel Power Supply Monitor with Remote Temperature Sense

Many applications with a single power regulator can benefit from the monitoring and control features of a power supply manager, but most power supply manager ICs have more than...

Temperature Logger with ATtiny817 and SD Card

This application note describes the implementation of a temperature logger, demonstrating use of several peripherals of the ATtiny817 AVR device. The TWI peripheral is used to communicate with an Atmel...

High Sensitivity APD Optical Receiver

The 7510-1 hybrid is a high gain, low noise optical receiver employing an avalanche photodiode (APD) with a nominal bandwidth of 100 MHz and superior dynamic range. It incorporates a...

An Introduction to Acoustic Thermometry

Acoustic thermometry is an arcane, elegant temperature measurement technique. It utilizes sound’s temperature dependent transit time in a medium to measure temperature. The medium may be a solid, liquid or...

Measure Multiple Temperatures in Battery- Management Systems, and Save Power Too

High-voltage, multi-cell, series-stacked batteries are found in electric vehicles, hybrid electric vehicles, electric bikes, power tools, and many other devices. Because of their high energy density, lithium-ion batteries are...

Temperature Switch vs. Thermistor

As electronic systems continue to include more features and higher performance in smaller packages, system heating issues are increasingly becoming a crucial design consideration. System overheating can reduce performance, damage...

Temperature Measurement Theory and Practical Techniques

The transfer of heat is normally from a high temperature object to a lower temperature object. Heat transfer from a cold region to a hot region can be done by...

Excellent Resource on Thermal Management

Thermal management in electronic systems is done for one or more of the three purposes outlined below. Control Temperature data is an input to a large number of control systems...

Temperature Sensors Design

In many systems, temperature control is fundamental. There are a number of passive and active temperature sensors that can be used to measure system temperature, including: thermocouple, resistive temperature detector...