Advertisement

Electronics and Electrical Engineering Application Notes

Read the latest electronics engineering product design Application Notes.

TAGS: Voltage

All Application Notes

Design and Analysis of a Time-Gain-Control (TGC) Circuit to Drive the Control Voltage for TI’s Ultrasound AFE

TI’s low-noise analog front ends (AFEs) have a time-gaincontrol (TGC) feature that supports ultrasound applications because they can alter the gain of the receiver as a function of time...

1 kV SenseFET Integrated Power Switch

Some industrial equipment that are supplied from a threephase AC power source such as industrial drives and energy meters often need an auxiliary power supply stage that can provide a...

60 W AC-DC Demonstrator

Housed in a tiny TSOP6 package, the NCP1256 lends itself very well to designing moderate to high output power converters. This application note demonstrates the part capabilities in a...

TOPSwitch-JX Family Design Guide

The TOPSwitch-JX is a highly integrated monolithic off-line switcher IC designed for off-line power supplies. TOPSwitch-JX integrated circuits enable design of power supplies up to 244 W, while providing high...

Designing With The HMC346MS8G Voltage Variable Attenuator

The HMC346MS8G is an absorptive Voltage Variable Attenuator (VVA) in an 8 lead surface-mount package operating from DC - 8 GHz. It features an on-chip reference attenuator for use with...

ADE9078 Low Power Mode for No Voltage Detection

In China, there is a requirement for polyphase meters related to no voltage detection. This requirement defines no voltage as any voltage on all phases lower than the threshold when...

Thermocouple Signal Conditioning Using the AD594/AD595

One of the most widely used devices for temperature measurement is the thermocouple. Whether in an industrial, commercial or scientific application, a thermocouple offers a cost effective solution to temperature...

Understanding the Operation of the Frequency Synthesizer in Maxim’s RF Transceivers

All of Maxim's 2.4GHz to 6GHz highly integrated transceivers include a high performance fractional-N synthesizer for generating the local oscillator (LO) signal. The fractional-N synthesizer generally consists of a phase...

Amplifier to ADC Interface

System designs using amplifiers and analog-to-digital converters (ADC) should focus on using the best features of each device. Amplifiers provide power gain, isolation, voltage gain, and impedance transformation. Data converters...

Circuit Guards Amplifier Outputs Against Overvoltage

A universal requirement for automotive electronics is that any device with direct connections to the wiring harness must be able to withstand shorts to the battery voltage. Though brutal, this...