Electronics and Electrical Engineering Projects

Featured electronics and electrical engineering design projects.
  • Multi-zone WiFi thermostat using Raspberry Pi

    Posted Thursday, September 07, 2017
    A heating and cooling thermostat requires a web-connected microcontroller, relays for activating the external circuits, and analog inputs for reading the temperature. Raspberry Pi provides an unexpensive WiFi platform, but... More

    Allegro Sensor Evaluation Kit ASEK-05

    Posted Sunday, September 03, 2017
    This ASEK-05 board and a firmware application provides a powerful and flexible system for evaluation and programming of Allegro Hall-effect sensor ICs. This ASEK system is intended for use with... More
  • MAX17055X EV Kit for Fuel Gauge IC with ModelGuage m5 EZ

    Posted Sunday, August 27, 2017
    The MAX17055X evaluation kit is used to evaluate MAX17055 low 7μA 1-Cell fuel gauge IC with ModelGauge m5 EZ. This EV kit features ModelGauge m5 algorithm, on-chip temperature measurement and... More

    Dual-Channel SCALE™-2+ Driver Core

    Posted Sunday, August 20, 2017
    The 2SC0106T device is a high performance two-channel IGBT/MOSFET gate driver core for 1200V IGBTs in the 37 kW to 110 kW power range. It features the new SCALE™-2+ chipset... More
  • DIY Power Bank

    Posted Thursday, August 17, 2017
    With increasing functionalities and high processing powers, smartphones battery backup is reduced over time and a need of portable power bank increased with the time. In this project we are... More

    BU7150NUV Headphone Amplifier IC Evaluation Board

    Posted Sunday, August 13, 2017
    BU7150NUV-EVK-001(SE) is an evaluation board of BU7150NUV headphone amplifier IC. It designed to evaluate BU7150NUV in Single-Ended (SE) mode as an audio amplifier. In SE mode, the device is applicable... More
  • ISL26134AV28EV1Z Delta Sigma A/D Converter Evaluation Board

    Posted Sunday, August 06, 2017
    The ISL26134AV28EV1Z evaluation board is used to evaluate the performance and functionality of the ISL26134 24-bit A/D converter. It includes an AT90USB162 microcontroller with a USB interface. The microcontroller interfaces... More

    Thermocouple with MCP3421 18-Bit Analog-to-Digital Converter (ADC)

    Posted Sunday, July 30, 2017
    This reference design demonstrates Microchip’s solution to accurately measure temperature using a Thermocouple and an 18-bit ADC, MCP3421. It eliminates the need for the traditional analog instrumentation system calibration or... More
  • Allegro Sensor Evaluation Kit ASEK-20

    Posted Sunday, July 23, 2017
    Allegro Sensor Evaluation Kit ASEK-20, the next generation evaluation kit that provides a powerful and flexible system for programming and evaluating allegro devices from multiple sensor families such as angle... More

    Multi-Channel JESD204B 15 GHz Clocking Board

    Posted Sunday, July 16, 2017
    This board is designed to support two high speed channels on independent boards by utilizing TI’s LMX2594 wideband PLL with integrated VCOs in order to generate a 10 MHz to... More
  • 9A, 3.8V to 18V Input, Synchronous Buck Regulator Evaluation Board

    Posted Sunday, July 09, 2017
    This ISL85009EVAL1Z platform allows quick evaluation of the high-performance features of the ISL85009 buck regulator. The ISL85009 is a 3.8V to 18V input, 9A synchronous buck regulator for applications with... More

    Modular IoT Gateway

    Posted Sunday, July 02, 2017
    The NXP modular IoT Gateway reference design enables large node networks (LNNs) with pre-integrated, tested and RF certified support for a wide array of wireless communications protocols including: Thread, ZigBee... More
  • 10 W Dimmable, High Efficiency, Non-Isolated Buck LED Driver

    Posted Sunday, June 25, 2017
    This engineering report describes a low component count, non-isolated, dimmable LED driver in buck topology, designed to drive an 84 V LED voltage string at 120 mA output current from... More

    Step Down circuit and Mobile Charging Point

    Posted Thursday, June 22, 2017
    I have assemble one prototype with 50% standard available parts and 50% own design parts. I want to take this project further but i dont have electronic circuit knowledge to... More